ssh root@192.168.16.57 root@192.168.16.57's password: To install Arch Linux follow the installation guide: https://wiki.archlinux.org/title/Installation_guide For Wi-Fi, authenticate to the wireless network using the iwctl utility. For mobile broadband (WWAN) modems, connect with the mmcli utility. Ethernet, WLAN and WWAN interfaces using DHCP should work automatically. After connecting to the internet, the installation guide can be accessed via the convenience script Installation_guide. # root@archiso ~ # # root@archiso ~ # # root@archiso ~ # eexport LANG=C # root@archiso ~ # iip r | grep default | awk '{ print "["$5"]";}' [enp0s3] # root@archiso ~ # iip address show enp0s3 2: enp0s3: mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 08:00:27:1a:fe:49 brd ff:ff:ff:ff:ff:ff altname enx0800271afe49 inet 192.168.16.57/20 metric 100 brd 192.168.31.255 scope global dynamic enp0s3 valid_lft 375sec preferred_lft 375sec inet 192.168.16.40/20 brd 192.168.31.255 scope global secondary enp0s3 valid_lft forever preferred_lft forever inet6 240d:1a:95b:f800:93e4:45b6:4ab7:5bc7/64 scope global temporary dynamic valid_lft 59148sec preferred_lft 59148sec inet6 240d:1a:95b:f800:a00:27ff:fe1a:fe49/64 scope global dynamic mngtmpaddr noprefixroute valid_lft 59148sec preferred_lft 59148sec inet6 fe80::a00:27ff:fe1a:fe49/64 scope link proto kernel_ll valid_lft forever preferred_lft forever # root@archiso ~ # # root@archiso ~ # iif [[ -e /dev/sda ]]; then \`then>  PART_ROOT=sda \`then> eelif [[ -e /dev/hda ]]; then \`elif-then>  PART_ROOT=hda \`elif-then> eelif [[ -e /dev/vda ]]; then \`elif-then>  PART_ROOT=vda \`elif-then> ffi # root@archiso ~ # eecho ":[${PART_ROOT}]:" :[sda]: # root@archiso ~ # ttimedatectl status Local time: Sat 2026-04-25 00:42:08 JST Universal time: Fri 2026-04-24 15:42:08 UTC RTC time: Fri 2026-04-24 15:42:08 Time zone: Asia/Tokyo (JST, +0900) System clock synchronized: yes NTP service: active RTC in local TZ: yes Warning: The system is configured to read the RTC time in the local time zone. This mode cannot be fully supported. It will create various problems with time zone changes and daylight saving time adjustments. The RTC time is never updated, it relies on external facilities to maintain it. If at all possible, use RTC in UTC by calling 'timedatectl set-local-rtc 0'. # root@archiso ~ # ttimedatectl set-timezone Asia/Tokyo # root@archiso ~ # ttimedatectl set-ntp true # root@archiso ~ # ttimedatectl set-local-rtc 0 # root@archiso ~ # ttimedatectl set-local-rtc 1 Warning: The system is now being configured to read the RTC time in the local time zone This mode cannot be fully supported. It will create various problems with time zone changes and daylight saving time adjustments. The RTC time is never updated, it relies on external facilities to maintain it. If at all possible, use RTC in UTC # root@archiso ~ # ttimedatectl status Local time: Sat 2026-04-25 00:42:10 JST Universal time: Fri 2026-04-24 15:42:10 UTC RTC time: Sat 2026-04-25 00:42:10 Time zone: Asia/Tokyo (JST, +0900) System clock synchronized: yes NTP service: active RTC in local TZ: yes Warning: The system is configured to read the RTC time in the local time zone. This mode cannot be fully supported. It will create various problems with time zone changes and daylight saving time adjustments. The RTC time is never updated, it relies on external facilities to maintain it. If at all possible, use RTC in UTC by calling 'timedatectl set-local-rtc 0'. # root@archiso ~ # ccd /etc/pacman.d/gnupg # root@archiso /etc/pacman.d/gnupg # rrm -f trustdb.gpg pubring.gpg pubring.gpg~ # root@archiso /etc/pacman.d/gnupg # ccd # root@archiso ~ # ppacman-key --init gpg: /etc/pacman.d/gnupg/trustdb.gpg: trustdb created gpg: no ultimately trusted keys found ==> Generating pacman master key. This may take some time. gpg: Generating pacman keyring master key... gpg: revocation certificate stored as '/etc/pacman.d/gnupg/openpgp-revocs.d/CE3634ABB18022807DA5257F9CE3DF628103BA73.rev' gpg: Done ==> Updating trust database... gpg: marginals needed: 3 completes needed: 1 trust model: pgp gpg: depth: 0 valid: 1 signed: 0 trust: 0-, 0q, 0n, 0m, 0f, 1u # root@archiso ~ # eecho "[`getconf LONG_BIT`]BIT" [64]BIT # root@archiso ~ # ppacman-key --populate archlinux ==> Appending keys from archlinux.gpg... ==> Locally signing trusted keys in keyring... -> Locally signed 5 keys. ==> Importing owner trust values... gpg: setting ownertrust to 4 gpg: setting ownertrust to 4 gpg: setting ownertrust to 4 gpg: inserting ownertrust of 4 gpg: setting ownertrust to 4 ==> Disabling revoked keys in keyring... -> Disabled 38 keys. ==> Updating trust database... gpg: Note: third-party key signatures using the SHA1 algorithm are rejected gpg: (use option "--allow-weak-key-signatures" to override) gpg: marginals needed: 3 completes needed: 1 trust model: pgp gpg: depth: 0 valid: 1 signed: 5 trust: 0-, 0q, 0n, 0m, 0f, 1u gpg: depth: 1 valid: 5 signed: 85 trust: 0-, 0q, 0n, 5m, 0f, 0u gpg: depth: 2 valid: 72 signed: 18 trust: 72-, 0q, 0n, 0m, 0f, 0u gpg: next trustdb check due at 2026-10-21 pacman-key --populate archlinux 17.06s user 1.16s system 91% cpu 19.885 total # root@archiso ~ # # root@archiso ~ # # root@archiso ~ # eecho syntax on > ~/.vimrc # root@archiso ~ # eecho colorscheme pablo >> ~/.vimrc # root@archiso ~ # eecho set mouse= >> ~/.vimrc # root@archiso ~ # MMAINETH=$(ip r | grep scope | cut -d' ' -f3 | head -1) # root@archiso ~ # eecho MAINETH=$MAINETH MAINETH=enp0s3 # root@archiso ~ # ddhclient $MAINETH Error: ipv4: Address already assigned. # root@archiso ~ # eexport SVN_USER="jin" # root@archiso ~ # eexport SVN_PASSWD="jin" # root@archiso ~ # ccurl -sL http://optiplex5040/dev/setup/git/linux/setup_archlinux/download.sh | bash % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 0100 8256 100 8256 0 0 950.7k 0 0100 8256 100 8256 0 0 849.6k 0 0100 8256 100 8256 0 0 836.4k 0 0 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 0100 73171 100 73171 0 0 3.93M 0 0100 73171 100 73171 0 0 3.41M 0 0100 73171 100 73171 0 0 3.38M 0 0 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 0100 505 100 505 0 0 38849 0 0100 505 100 505 0 0 34232 0 0100 505 100 505 0 0 33858 0 0 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 0100 254 100 254 0 0 22426 0 0100 254 100 254 0 0 19265 0 0100 254 100 254 0 0 18901 0 0 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 0100 463 100 463 0 0 42144 0 0100 463 100 463 0 0 41532 0 0100 463 100 463 0 0 40987 0 0 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 0100 12065 100 12065 0 0 824.2k 0 0100 12065 100 12065 0 0 705.4k 0 0100 12065 100 12065 0 0 678.8k 0 0 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 0100 523 100 523 0 0 41058 0 0100 523 100 523 0 0 39945 0 0100 523 100 523 0 0 39507 0 0 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 0100 863 100 863 0 0 76156 0 0100 863 100 863 0 0 75148 0 0100 863 100 863 0 0 74249 0 0 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 0100 5104 100 5104 0 0 507.9k 0 0100 5104 100 5104 0 0 387.3k 0 0100 5104 100 5104 0 0 355.6k 0 0 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 0100 14047 100 14047 0 0 1.03M 0 0100 14047 100 14047 0 0 857.5k 0 0100 14047 100 14047 0 0 849.1k 0 0 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 0100 513 100 513 0 0 44612 0 0100 513 100 513 0 0 39959 0 0100 513 100 513 0 0 33637 0 0 # root@archiso ~ # ssed -i 's|PING_HOSTNAME="\(.*\)"|PING_HOSTNAME="192.168.16.57"|g' ./alis.conf # root@archiso ~ # ssed -i 's|KEYS="\(.*\)"|KEYS="us"|g' ./alis.conf # root@archiso ~ # ssed -i 's|REFLECTOR_COUNTRIES="\(.*\)"|REFLECTOR_COUNTRIES=("Japan")|g' ./alis.conf # root@archiso ~ # ssed -i 's|TIMEZONE="\(.*\)"|TIMEZONE="/usr/share/zoneinfo/Asia/Tokyo"|g' ./alis.conf # root@archiso ~ # ssed -i 's|LOCALES=("\(.*\)")|LOCALES=("en_US.UTF-8 UTF-8")|g' ./alis.conf # root@archiso ~ # ssed -i 's|LOCALE_CONF=("\(.*\)")|LOCALE_CONF=("LANG=en_US.UTF-8" "LANGUAGE=en_US:en")|g' ./alis.conf # root@archiso ~ # ssed -i 's|KEYMAP=".*"|KEYMAP="KEYMAP=us"|g' ./alis.conf # root@archiso ~ # ssed -i 's|KEYLAYOUT=".*"|KEYLAYOUT="us"|g' ./alis.conf # root@archiso ~ # ssed -i 's|USER_NAME=".*"|USER_NAME="jin"|g' ./alis.conf # root@archiso ~ # ssed -i 's|PACMAN_MIRROR=.*|PACMAN_MIRROR=https://archive.archlinux.org/repos/2026/04/10/\\$repo/os/\\$ arch|g' ./alis.conf # root@archiso ~ # ssed -i 's|^\(Server[[:space:]]*=.*\)$|##\1|g' /etc/pacman.d/mirrorlist && echo "Server = https://arc hive.archlinux.org/repos/2026/04/10/\$repo/os/\$arch" >> /etc/pacman.d/mirrorlist # root@archiso ~ # # root@archiso ~ # ssed -i "s/^[[:space:]]*\(SigLevel[[:space:]]*=[[:space:]]*\)\(Required[[:space:]]*DatabaseOptional[[:sp ace:]]*\)$/#\1\2\n\1Never/g" /etc/pacman.conf # root@archiso ~ # # root@archiso ~ # lls -l /sys/firmware/efi;echo [CHK:$?] ls: cannot access '/sys/firmware/efi': No such file or directory zsh: no matches found: [CHK:2] # 1 root@archiso ~ # :(ssed -i 's|BOOTLOADER=".*grub .*refind .*systemd"|BOOTLOADER="grub !refind !systemd"|g' ./alis.conf # root@archiso ~ # # root@archiso ~ # ssed -i 's|DESKTOP_ENVIRONMENT=".*gnome .*kde .*xfce .*mate \(.*\)"|DESKTOP_ENVIRONMENT="!gnome !kde xf ce !mate \1"|g' ./alis.conf # root@archiso ~ # ssed -i 's|VAGRANT=".*"|VAGRANT="true"|g' ./alis.conf # root@archiso ~ # ssed -i 's|/dev/sda|/dev/sda|g' ./alis.conf # root@archiso ~ # ssed -i 's|REBOOT=".*"|REBOOT="false"|g' ./alis.conf # root@archiso ~ # eexport SETUP=NET # root@archiso ~ # # root@archiso ~ # # root@archiso ~ # eecho "SETUP[${SETUP}]" SETUP[NET] # root@archiso ~ # ssed -i 's|^\(Server[[:space:]]*=.*\)$|##\1|g' /etc/pacman.d/mirrorlist && echo "Server = https://arc hive.archlinux.org/repos/2026/04/10/\$repo/os/\$arch" >> /etc/pacman.d/mirrorlist # root@archiso ~ # # root@archiso ~ # eecho "SETUP[${SETUP}]" SETUP[NET] # root@archiso ~ # # root@archiso ~ # # root@archiso ~ # # root@archiso ~ # eecho "[`getconf LONG_BIT`]BIT[${SETUP}]" [64]BIT[NET] # root@archiso ~ # # root@archiso ~ # # root@archiso ~ # # root@archiso ~ # eecho "[`getconf LONG_BIT`]BIT" [64]BIT # root@archiso ~ # eexport ARCH=64 # root@archiso ~ # # root@archiso ~ # ppacman -Sy archlinux-keyring --noconfirm error: custom: key "767056F5FE4902C762ED57ED8AC127EADEF4677B" is unknown :: Import PGP key 767056F5FE4902C762ED57ED8AC127EADEF4677B? [Y/n] error: key "767056F5FE4902C762ED57ED8AC127EADEF4677B" could not be looked up remotely :: Synchronizing package databases... custom custom 21.0 KiB 5.00 B/s --:-- [#---------------------------------------] 3% custom 587.7 KiB 7.09 MiB/s 00:00 [########################################] 100%error: custom: key "767056F5FE4902C762ED57ED8AC127EADEF4677B" is unknown :: Import PGP key 767056F5FE4902C762ED57ED8AC127EADEF4677B? [Y/n] error: key "767056F5FE4902C762ED57ED8AC127EADEF4677B" could not be looked up remotely error: failed to synchronize all databases (invalid or corrupted database (PGP signature)) # 1 root@archiso ~ # :(../alis.sh Welcome to Arch Linux Install Script Warning! This script deletes all partitions of the persistent storage and continuing all your data in it will be lost. Do you want to continue? [y/N] y # init() step ++ loadkeys us + save_globals + cat + execute_step facts ' configuration_install sanitize_variables check_variables warning init facts checks prepare partition install archlinux_keyring configuration mkinitcpio_configuration display_driver kernels mkinitcpio network virtualbox vmware users bootloader custom_shell desktop_environment packages vagrant systemd_units end' + STEP=facts + STEPS=' configuration_install sanitize_variables check_variables warning init facts checks prepare partition install archlinux_keyring configuration mkinitcpio_configuration display_driver kernels mkinitcpio network virtualbox vmware users bootloader custom_shell desktop_environment packages vagrant systemd_units end' + [[ configuration_install sanitize_variables check_variables warning init facts checks prepare partition install archlinux_keyring configuration mkinitcpio_configuration display_driver kernels mkinitcpio network virtualbox vmware users bootloader custom_shell desktop_environment packages vagrant systemd_units end =~ facts ]] + eval facts ++ facts ++ print_step 'facts()' ++ STEP='facts()' ++ echo '' ++ echo -e '\033[1;34m# facts() step\033[0m' # facts() step ++ echo '' ++ '[' -d /sys/firmware/efi ']' ++ BIOS_TYPE=bios ++ '[' -f alis.asciinema ']' ++ ASCIINEMA=false ++ DEVICE_SATA=false ++ DEVICE_NVME=false ++ DEVICE_MMC=false +++ echo /dev/sda +++ grep '^/dev/[a-z]d[a-z]' ++ '[' -n /dev/sda ']' ++ DEVICE_SATA=true +++ lscpu +++ grep GenuineIntel ++ '[' -n 'Vendor ID: GenuineIntel' ']' ++ CPU_VENDOR=intel +++ lspci -nn +++ grep '\[03' +++ grep -i intel ++ '[' -n '' ']' +++ lspci -nn +++ grep '\[03' +++ grep -i amd ++ '[' -n '' ']' +++ lspci -nn +++ grep '\[03' +++ grep -i nvidia ++ '[' -n '' ']' +++ lspci -nn +++ grep '\[03' +++ grep -i vmware ++ '[' -n '00:02.0 VGA compatible controller [0300]: VMware SVGA II Adapter [15ad:0405]' ']' ++ GPU_VENDOR=vmware ++ '[' auto == auto ']' ++ case "$GPU_VENDOR" in +++ systemd-detect-virt +++ grep -i oracle ++ '[' -n oracle ']' ++ VIRTUALBOX=true +++ systemd-detect-virt +++ grep -i vmware ++ '[' -n '' ']' + save_globals + cat + execute_step checks ' configuration_install sanitize_variables check_variables warning init facts checks prepare partition install archlinux_keyring configuration mkinitcpio_configuration display_driver kernels mkinitcpio network virtualbox vmware users bootloader custom_shell desktop_environment packages vagrant systemd_units end' + STEP=checks + STEPS=' configuration_install sanitize_variables check_variables warning init facts checks prepare partition install archlinux_keyring configuration mkinitcpio_configuration display_driver kernels mkinitcpio network virtualbox vmware users bootloader custom_shell desktop_environment packages vagrant systemd_units end' + [[ configuration_install sanitize_variables check_variables warning init facts checks prepare partition install archlinux_keyring configuration mkinitcpio_configuration display_driver kernels mkinitcpio network virtualbox vmware users bootloader custom_shell desktop_environment packages vagrant systemd_units end =~ checks ]] + eval checks ++ checks ++ print_step 'checks()' ++ STEP='checks()' ++ echo '' ++ echo -e '\033[1;34m# checks() step\033[0m' # checks() step ++ echo '' ++ check_facts ++ '[' bios == bios ']' ++ check_variables_list BOOTLOADER grub grub true true ++ NAME=BOOTLOADER ++ VALUE=grub ++ VALUES=grub ++ REQUIRED=true ++ SINGLE=true ++ '[' true == '' -o true == true ']' ++ check_variables_value BOOTLOADER grub ++ NAME=BOOTLOADER ++ VALUE=grub ++ '[' -z grub ']' ++ [[ true == '' ]] ++ [[ true == true ]] ++ [[ grub != '' ]] ++ [[ grub =~ ]] +++ echo grub +++ grep -F -w grub ++ '[' grub '!=' '' -a -z grub ']' + save_globals + cat + execute_step prepare ' configuration_install sanitize_variables check_variables warning init facts checks prepare partition install archlinux_keyring configuration mkinitcpio_configuration display_driver kernels mkinitcpio network virtualbox vmware users bootloader custom_shell desktop_environment packages vagrant systemd_units end' + STEP=prepare + STEPS=' configuration_install sanitize_variables check_variables warning init facts checks prepare partition install archlinux_keyring configuration mkinitcpio_configuration display_driver kernels mkinitcpio network virtualbox vmware users bootloader custom_shell desktop_environment packages vagrant systemd_units end' + [[ configuration_install sanitize_variables check_variables warning init facts checks prepare partition install archlinux_keyring configuration mkinitcpio_configuration display_driver kernels mkinitcpio network virtualbox vmware users bootloader custom_shell desktop_environment packages vagrant systemd_units end =~ prepare ]] + eval prepare ++ prepare ++ print_step 'prepare()' ++ STEP='prepare()' ++ echo '' ++ echo -e '\033[1;34m# prepare() step\033[0m' # prepare() step ++ echo '' ++ configure_reflector ++ '[' false == false ']' ++ systemctl stop reflector.service ++ configure_time ++ timedatectl set-ntp true ++ prepare_partition ++ set +e ++ mountpoint -q /mnt/boot ++ '[' 0 == 0 ']' ++ umount /mnt/boot ++ mountpoint -q /mnt ++ '[' 0 == 0 ']' ++ umount /mnt ++ lvs vg-root Volume group "vg-root" not found Cannot process volume group vg-root ++ '[' 5 == 0 ']' ++ vgs vg Volume group "vg" not found Cannot process volume group vg ++ '[' 5 == 0 ']' ++ '[' -e /dev/mapper/cryptroot ']' ++ set -e ++ ask_passwords ++ '[' '' == ask ']' ++ '[' -n '' -a ask == ask ']' ++ '[' ask == ask ']' ++ PASSWORD_TYPED=false ++ '[' false '!=' true ']' ++ read -sp 'Type root password: ' ROOT_PASSWORD Type root password: ++ echo '' ++ read -sp 'Retype root password: ' ROOT_PASSWORD_RETYPE Retype root password: ++ echo '' ++ '[' 129921 == 129921 ']' ++ PASSWORD_TYPED=true ++ '[' true '!=' true ']' ++ '[' ask == ask ']' ++ PASSWORD_TYPED=false ++ '[' false '!=' true ']' ++ read -sp 'Type user password: ' USER_PASSWORD Type user password: ++ echo '' ++ read -sp 'Retype user password: ' USER_PASSWORD_RETYPE Retype user password: ++ echo '' ++ '[' jin123 == jin123 ']' ++ PASSWORD_TYPED=true ++ '[' true '!=' true ']' ++ configure_network ++ '[' -n '' ']' ++ ping -c 1 -i 2 -W 5 -w 30 192.168.16.57 PING 192.168.16.57 (192.168.16.57) 56(84) bytes of data. 64 bytes from 192.168.16.57: icmp_seq=1 ttl=64 time=0.024 ms --- 192.168.16.57 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.024/0.024/0.024/0.000 ms ++ '[' 0 -ne 0 ']' + save_globals + cat + execute_step partition ' configuration_install sanitize_variables check_variables warning init facts checks prepare partition install archlinux_keyring configuration mkinitcpio_configuration display_driver kernels mkinitcpio network virtualbox vmware users bootloader custom_shell desktop_environment packages vagrant systemd_units end' + STEP=partition + STEPS=' configuration_install sanitize_variables check_variables warning init facts checks prepare partition install archlinux_keyring configuration mkinitcpio_configuration display_driver kernels mkinitcpio network virtualbox vmware users bootloader custom_shell desktop_environment packages vagrant systemd_units end' + [[ configuration_install sanitize_variables check_variables warning init facts checks prepare partition install archlinux_keyring configuration mkinitcpio_configuration display_driver kernels mkinitcpio network virtualbox vmware users bootloader custom_shell desktop_environment packages vagrant systemd_units end =~ partition ]] + eval partition ++ partition ++ print_step 'partition()' ++ STEP='partition()' ++ echo '' ++ echo -e '\033[1;34m# partition() step\033[0m' # partition() step ++ echo '' ++ partprobe -s /dev/sda /dev/sda: msdos partitions 1 2 ++ '[' auto == auto ']' ++ PARTITION_PARTED_FILE_SYSTEM_TYPE=ext4 ++ '[' ext4 == f2fs ']' ++ PARTITION_PARTED_UEFI='mklabel gpt mkpart ESP fat32 1MiB 512MiB mkpart root ext4 512MiB 100% set 1 esp on' ++ PARTITION_PARTED_BIOS='mklabel msdos mkpart primary ext4 4MiB 512MiB mkpart primary ext4 512MiB 100% set 1 boot on' ++ '[' bios == uefi ']' ++ '[' bios == bios ']' ++ '[' true == true ']' ++ PARTITION_BOOT=/dev/sda1 ++ PARTITION_ROOT=/dev/sda2 ++ DEVICE_ROOT=/dev/sda2 ++ '[' false == true ']' ++ '[' false == true ']' ++ '[' auto == custom -o auto == manual ']' ++ PARTITION_BOOT_NUMBER=/dev/sda1 ++ PARTITION_ROOT_NUMBER=/dev/sda2 ++ PARTITION_BOOT_NUMBER=1 ++ PARTITION_BOOT_NUMBER=1 ++ PARTITION_BOOT_NUMBER=1 ++ PARTITION_ROOT_NUMBER=2 ++ PARTITION_ROOT_NUMBER=2 ++ PARTITION_ROOT_NUMBER=2 ++ '[' auto == auto ']' ++ '[' 64 == 32 ']' ++ sgdisk --zap-all /dev/sda *************************************************************** Found invalid GPT and valid MBR; converting MBR to GPT format in memory. *************************************************************** Warning! Secondary partition table overlaps the last partition by 33 blocks! You will need to delete this partition or resize it in another utility. Warning: The kernel is still using the old partition table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) GPT data structures destroyed! You may now partition the disk using fdisk or other utilities. ++ sgdisk -o /dev/sda Creating new GPT entries in memory. Warning: The kernel is still using the old partition table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) The operation has completed successfully. ++ wipefs -a -f /dev/sda /dev/sda: 8 bytes were erased at offset 0x00000200 (gpt): 45 46 49 20 50 41 52 54 /dev/sda: 8 bytes were erased at offset 0x1fffffe00 (gpt): 45 46 49 20 50 41 52 54 /dev/sda: 2 bytes were erased at offset 0x000001fe (PMBR): 55 aa ++ partprobe -s /dev/sda Error: Partition(s) 2 on /dev/sda have been written, but we have been unable to inform the kernel of the change, probably because it/they are in use. As a result, the old partition(s) will remain in use. You should reboot now before making further changes. # 1 root@archiso ~ # :(eecho 00:01:24 > run_time.txt # root@archiso ~ #